제품 페이지 서브띠 디자인

Let’s 5GHz Let’s stable wireless

LaON, the INTERCOMmunication-maker

PRODUCTS

LT250 Basic system

  • High quality audio performance
  • Less than 23ms low latency
  • One(1) RBS25 repeater connection
  • Nine(9) full duplex audio channels with three(3) group channels
  • Up to 128 Belt Pack connections
  • Slim basic system yet supports for intelligent communications.
  • Perfect for medium sized venues such as house of worship and university.
리소스 다운받기

System highlights

Operates in license-free 5GHz frequency
where there are less traffics and interferences with approximately 15 RF channels worldwide.
Super-scalable IP based repeater solution, RS(Remote Station)
can easily support for expanding the coverage and multiple studios or multi-floor spaces can be consolidated to one communication range. Supports one(1) RBS25 connectionand prompt automatic or manual hands off is available between coverage.
Industry top level best-in-class audio performance with low latency
23ms low latency level and non-compressed audio transmission technology guarantee a high quality audio performance.
Three(3) communication group channel
Single or multiple communication group channels can be assigned to the Base Station, Belt Pack, and AUX devices each and those group channels can be used in single, multiple or all together at the same time.
Nine(9) full-duplex listen & talk communication channel (1 BS + 8 BPs)
Nine (9) full-duplex audio channels are offered with one (1) Base Station.
One hundred and twenty eight(128) Belt Pack connection
One hundred and twenty eight (128) Belt Packs can be registered into a Base Station.
Auxiliary I/O interfaces
Auxiliary Input/Output port is provided to secure seamless connections with various traditional wired intercom systems or external audio devices.
Compact design
Comfortable headset and compact Belt Pack with internal antenna support high wearability with mobility even at the tough broadcasting or live event sites.
Various options on battery
Either LaON provided rechargeable battery or AA type Alkaline battery with LaON provided designated battery sled can be used for supplying power to the Belt Pack. Also, non-LaON provided rechargeable battery can be used with the battery sled.
Monitoring functions
LT250 system provides various monitoring functions for Base Station, Remote Station and Belt Pack such as link status, RSSI (Received Signal Strength Indication), battery status and microphone gain level and etc.
Monitoring of audio break-up
When a Belt Pack is out of coverage, the Belt Pack user is easily able to monitor the audio break-up with his/her side tone.
Industry top level security with AES 256bit level 3 encryption
AES 256bit Level 3, the top level encryption technology is applied to secure confidential communications.
Efficient 7port charger
There are five (5) bays for charging the Belt Pack batteries which are equipped in the Belt Packs and two (2) bays for charging the Belt Pack batteries which are separated from the Belt Packs. Two (2) of them are for dual use for charging Remote Station or Mobile Station’s batteries.

BS250 Base Station

  • LT250 Basic system Base Station
  • Desk Station type
  • Operates in 5GHz UNII band with an automatic RF scan
  • One(1) RBS25 repeater connection
  • Offer AUX I/O(x1) interface
  • 128 Belt Pack connections
  • Nine(9) full-duplex audio communication channel
  • Three(3) group communication channel
Base Station BS250_Front & Rear
[Base Station BS250_Front & Rear]
Specification sheet
RF Frequency: UNII band: 5.26GHz~5.32GHz, 5.50GHz~5.70GHz, 5.745GHz~5.805GHz
Antenna Connector Type: External 1/2 -wave dipole, SMA connector

Transmitter

Type: Frequency/Time Diversity
Transmit Power: 17dBm(50mW) @antenna port
Modulation Type: QPSK
Frequency Stability: ± 2ppm

Receiver

Type: Antenna/Frequency/Time Diversity
RF Sensitivity: -85dBm for 5 BER
Frequency Stability: ± 2ppm
Belt Packs per Base station: Inherently, 128 Belt Packs can be paired up, and ten (10) Belt Packs operating in full-duplex (talk/listen) at the same time while eleven (11) full-duplex channel is provided including the Base Station.
Audio Communication Group: Three (3)
Audio Frequency Response: 200 Hz to 3.5 kHz
Audio Dynamic Range: >70dB or more
Headset output: 250mW into 32 Ohm
Microphone Type: Dynamic or Electret
Headset Connector: 6-pin mini-DIN male
Latency: One-way system latency less than 23ms direct
Communication Security: 256 bits key AES level 3 Encryption
Auxiliary Input: XLR-3F/1/4”(6:35mm) combo jack, 600Ω balanced, level adjustable
Auxiliary output: XLR-3M, 600Ω balanced, level adjustable
8Ω Speaker Output: 1W into 8Ω
LAN RJ-45 Connector: One (CAT-5 standard wiring), Up to one(1) Remote Station can be connected via LAN.
USB Connector : Monitoring and Program port
Front Panel Display: OLED 128 x 64 Resolutions
Front Panel Button: Touch buttons
Power Input: 100-240VAC, 47-63Hz, 11.4-12.6VDC
Operating Temperature: 0°C to 50°C (32°F to 122°F)
Dimensions: 8.26W x 6.37L x 1.73H inch (21W x 16.2L x 4.4H cm),
Without Connector on the Rear panel and foot.
Weight: 2.4118 lbs (1094g)

BP250 Belt Pack

Belt Pack BP250_Front & Rear
[Belt Pack BP250_Front & Rear]
Battery sled
[Battery sled]
  • LT250 Basic system Belt Pack
  • Three(3) group communication channel
  • Two(2) group channels communication of three(3) group channels
  • Hands-off sensibility level adjustment
  • Either rechargeable battery or AA type alkaline batteries (x2) with a designated battery sled can be used
  • Compact and light pack
Specification sheet
RF Frequency: UNII band: 5.26GHz~5.32GHz, 5.50GHz~5.70GHz, 5.745GHz~5.805GHz
Antenna Connector Type: Internal

Transmitter

Type: Antenna/Frequency/Time Diversity
Transmit Power: 17dBm(50mW) @antenna port
Modulation Type: QPSK
Frequency Stability: ± 2ppm

Receiver

Type: Antenna/Frequency/Time Diversity
RF Sensitivity: -85dBm for 5 BER
Frequency Stability: ± 2ppm
Audio Communication Group: Three (3)
Audio Frequency Response : 200 Hz to 3.5 kHz
Audio Dynamic Range: >70dB or more
Headset output: 250mW into 32 Ohm
Microphone Type: Dynamic or Electret
Headset Connector: 6-pin mini-DIN male
Latency: One-way system latency less than 23ms direct
Communication Security: 256 bits key AES level 3 Encryption
Display: OLED 128 x 32 Resolutions
Button: Push buttons
Battery Requirement: 2.4V 2450mA h Rechargeable NiMH Battery or Two AA size 1.5V alkaline
batteries
Rechargeable Battery life: Nine (9) hours in hands free mode
Operating Temperature: 0°C to 50°C (32°F to 122°F)
Dimensions: 2.89W x 0.92L x 3.83H inch (7.35W x 2.35L x 9.73H cm) without Belt Clip
Weight: 0.445 lbs (202g) with battery / 0.29 lbs (133g) without battery

RBS25 Remote Station

Remote Station ‘RBS25’ of LT250 system
[Remote Station ‘RBS25’ of LT250 system]
Bottom of RBS25
[Bottom of RBS25]
Battery sled
[Battery sled]
  • IP based PoE enabled repeater
  • Operates in 5GHz UNII band
  • Standard LAN network configuration
  • CAT-5 UPT/CAT-5e STP cable to be used
  • Multiple studio spaces or multi-floors can be consolidated in a wireless coverage through easy wiring
  • One(1) RBS25 can be connected per Base Station BS250
  • Prompt automatic hands-off between stations is available as well as manual hands-off
  • Up to one hundred twenty eight (128) Belt Pack link
  • Provides the same coverage with Base Station
  • Shares the full-duplex and group communication channels with the Base Station
Specification sheet
RF Frequency: UNII band: 5.26GHz~5.32GHz, 5.50GHz~5.70GHz, 5.745GHz~5.805GHz
Antenna Connector Type: External 1/2 -wave dipole, SMA connector

Transmitter

Type: Frequency/Time Diversity
Transmit Power: 17dBm(50mW) @antenna port
Modulation Type: QPSK
Frequency Stability: ± 2ppm

Receiver

Type: Antenna/Frequency/Time Diversity
RF Sensitivity: -85dBm for 5 BER
Frequency Stability: ± 2ppm
LAN RJ-45 Connector: One (CAT-5 standard wiring) , Connect to the Base Station via LAN.
USB Connector : Program Port
Power Input: 100-240VAC, 47-63Hz, 11.4-12.6VDC or PoE from the Network Switch
Operating Temperature: 0°C to 50°C (32°F to 122°F)
Dimensions: 3.46W x 1.47L x 4.80H inch (8.8W x 3.74L x 12.2H cm) without RBS holder kit
Weight: 0.831 lbs (377g) without battery and RBS holder kit